Use this guide to work out whether the charger you’ve picked has a cable in-built, or whether you’ll need to bring your own.
Tethered vs untethered chargers
Chargers on the Wevolt Network fall into two patterns:
- Tethered (cable in-built) — the cable is permanently attached to the charger. Just unhook it and plug it into your vehicle.
- Untethered (bring your own) — the charger has a socket only. You need to provide your own cable that fits both your vehicle and the charger socket.
How to check before you go
- Open the Wevolt App.
- Tap the charging station you wish to use on the map.
- In the middle of the screen under Select Connector, the light grey box shows either “Bring Your Cable” or “Cable Available”.
If a station has more than one connector, check each one — it’s common for a single station to mix tethered and untethered options.
Common connector types in Australia
- CCS2 — DC fast charging. Almost always tethered. Used by most modern EVs in Australia for high-speed charging.
- Type 2 — AC charging. Found on most AC chargers. Can be tethered or untethered — check the listing.
- AC tethered — an AC charger with a Type 2 cable already attached. No cable needed.
As a rule of thumb: DC chargers are nearly always tethered. AC chargers vary.
Arrived without a cable?
If you’ve arrived at an untethered charger and don’t have your own cable, open the Wevolt App and look for a nearby alternative:
- Open the Map tab.
- Tap the filter icon and narrow the results to chargers with a cable in-built (look for the “Cable Available” or AC tethered option).
- Look for any DC fast chargers nearby — these are almost always tethered.
✓ A cable in the boot saves the trip
If you regularly use AC chargers, keep a Type 2 to Type 2 cable in your vehicle. It opens up every untethered AC charger on the network.
Still need help?
If the listing isn’t clear or the connector doesn’t match what you find on site, reach out to our support team.
- Email: contact@wevolt.com.au
- Website: wevolt.com.au
Related articles
- How to find Chargers? — find a charger with the right connector for your vehicle
- Charging cable stuck in the charge point? — what to do if your cable won’t release after the session ends
- Session won’t start or stops unexpectedly — troubleshooting if the charger doesn’t start once you’re plugged in
Related Articles
Charging cable stuck in the charge point?
A charging cable that won't release is usually caused by one of a few common things, most of which you can sort out yourself. This guide covers the two places a cable can be held — at your car and at the charger — and what to do for each. ✓ Try the ...Charging at CitiPower Pole-Mounted Chargers
Some chargers in the Wevolt App are pole-mounted CitiPower and Powercor kerbside chargers, part of an electricity network trial across Melbourne. They work through the Wevolt App exactly like any other Wevolt charger for starting a session and ...How to Start a Charge (and Do I Need an RFID Card?)
Use this guide to start your first charge on the Wevolt Network. It covers how to begin a session from the app, whether you need a physical RFID card, and the right order of steps at chargers that lock the socket. If you have charged before and the ...Wevolt charging station status updates
Use this page to check the current status of Wevolt-listed chargers that are known to be experiencing issues. If the unit you wanted to use is not listed below, see The charger I'm trying to use isn't working for general troubleshooting, or How to ...How to find Chargers?
Use this guide to find a Wevolt charger near you, check its real-time status, and navigate directly to it from the app. Open the map Launch the Wevolt App and tap the Map tab. The map centres on your current location and shows every public charger ...